Repairing storm-loosened siding on an Arden traditional home

Loose siding drew attention to the wall

The homeowner noticed siding sections pulling away from the wall and a damaged area near the trim. On this two-story Arden home, the siding was part of the exterior wall envelope, so loose material could leave the wall more exposed to rain. The homeowner called us to address the visible damage before it spread to nearby sections.

The home fit a common Arden pattern: a two-story traditional exterior with siding details that needed to remain consistent after the repair. The goal was a focused repair, not a broad replacement scope. We planned the work around the affected sections and the condition of the surrounding wall.

The damage was limited to specific sections

Our technician checked the siding face, seams, edges, and trim before removing anything. Several sections were loose or damaged, but the surrounding siding remained suitable to stay in place. We also checked the exposed wall area for signs that water could reach the assembly.

The inspection shaped a defined one-visit scope. Because Arden is in unincorporated Buncombe County, permitting questions follow Buncombe County rules. The county states that replacement exterior siding on a single-family home costing $40,000 or less does not require a permit when the work meets the listed exemption conditions. We kept the repair limited to the affected siding and trim details.

A focused repair from removal to final check

1. Protect the work area

   We prepared the area around the two-story home and checked the siding layout before removal. This helped us preserve adjacent sections and identify the profile needed for the replacement material.

2. Remove damaged sections

   Our technicians carefully removed the loose and damaged siding sections without disturbing the surrounding wall finish. We exposed only the areas needed to check the wall surface and prepare the repair.

3. Check the wall details

   We examined the exposed area, edges, and trim for conditions that could affect the repair. The inspection confirmed that the work could remain focused on the damaged siding sections.

4. Fit matching material

   We installed replacement sections with a profile suited to the existing siding. The pieces were aligned with the neighboring courses so the repair followed the home's established exterior pattern.

5. Reseal and verify the finish

   We resealed the repaired trim and checked the seams, edges, and attachment points. The final review confirmed that the loose areas were secured and the repaired sections were ready for normal weather exposure.

The exterior was secured in one visit

The repaired siding sections sat flush with the surrounding wall, and the loose areas were secured. Matching the existing profile kept the repair consistent with the two-story traditional home rather than creating a visibly separate patch.

Our team completed the work in one spring visit. The homeowner received a defined repair focused on the damaged sections, with trim resealed and the final siding details checked before we left.

What made this repair mid-range

The cost came from the amount of damaged siding, the access required on a two-story home, and the detail work needed to match existing profiles and reseal the trim. We scoped those conditions directly instead of using a vague allowance.